Promoclean TP 1114 is a concentrated, medium-pH aqueous cleaner from Inventec Performance Chemicals. It removes polishing pastes, hydrocarbon oils and water-soluble oils in aqueous immersion with ultrasonic agitation.
Key Features of Promoclean TP 1114
- Greenway certified (GW-Score 27)
- 1–3 days corrosion protection
- Perfect for luxury watchmaking
Is Promoclean TP 1114 Safe for Sensitive Alloys?
Yes. Its medium-pH formulation works safely on sensitive alloys without losing cleaning power. It suits ferrous and non-ferrous metals, including stainless steel, aluminium, titanium, copper, brass, gold and silver.
A Spot-Free Finish
Strong wetting action lifts pastes and oils without attacking the base metal. It also leaves no residues or spots. Meanwhile, passivation leaves a thin protective layer, so parts stay protected for 1–3 days between steps.
Where Is Promoclean TP 1114 Used?
Typical uses include luxury watch manufacturing, jewelry production and medical parts manufacturing. It also provides inter-operation protection before later manufacturing steps.
Greenway Certified
TP 1114 carries Inventec’s Greenway designation (GW-Score 27). It is partially made from renewable raw materials and free of CMR substances. In addition, it is non-flammable, with very low VOC content (<25%) and zero GWP. It also carries no environmental hazard (H) labelling.
TP 1114 or TP 1117?
Need longer protection? Promoclean TP 1117 gives 3–7 days of corrosion protection. However, it does not carry the Greenway label.
Why Choose Promoclean TP 1114?
It pairs a spot-free finish with lower environmental impact. Therefore, it suits manufacturers looking to reduce the footprint of their cleaning process.
Promoclean TP 1114 Specifications
| Attribute | Detail |
|---|---|
| Appearance | Light brown |
| Density at 20°C | 1.05 ± 0.01 g/ml |
| pH (pure product) | 11.0 ± 0.5 |
| pH (1% concentration) | 10.1 ± 0.5 |
| Water solubility | Totally soluble |
| Surface tension at 1% | 28 dynes/cm |
Recommended Process Parameters
| Parameter | Cleaning | Protection Step |
|---|---|---|
| Concentration | 1.5% in DI water | 0.5–1% in DI water |
| Temperature | 40–70°C / 104–158°F | 40–70°C / 104–158°F |
| Time | 3–10 minutes | 1–3 minutes |
| Ultrasonic agitation | Yes | Yes |
Rinsing and Drying
After cleaning, rinse with deionised water at 20–30°C for 2–5 minutes. Then dry with hot air, vacuum or a drying solvent for 5–20 minutes.
Full technical data is available in the product datasheet, with safety information in the MSDS finder. Browse our full range of aqueous cleaners to compare options for your application.
