Thermasolv IM1 is a dielectric heat transfer fluid from Inventec Performance Chemicals. It is engineered for single-phase and two-phase immersion and direct cooling systems.
Key Features of Thermasolv IM1
- Pour point -135°C / -211°F
- Dielectric strength 28 kV
- Perfect for two-phase immersion
What Is Thermasolv IM1 Used For?
It suits single-phase and two-phase immersion cooling, plus cold plate or tube direct cooling. Typical uses also include dielectric testing and specialised manufacturing cooling.
Single or Two-Phase Cooling
With a boiling point of 61°C, it can work as a single-phase coolant or boil at hot surfaces in two-phase systems. As a result, it offers flexibility across different cooling designs.
Extremely Low Pour Point
A pour point of -135°C and low kinematic viscosity (0.38 cSt at 20°C) make pumping efficient. In addition, thermal conductivity of 0.069 W/m-K gives uniform cooling.
Is Thermasolv IM1 Safe With Live Electronics?
Yes. Its dielectric strength is 28 kV, with resistivity of 1.00E+09 Ohm-cm. So equipment can run under power while fully submerged. It is also non-flammable and non-toxic, with no EUH-phrase hazard classifications.
Why Choose Thermasolv IM1?
It is thermally and chemically stable, which extends service life and lowers total cost of ownership. It also has a medium-low GWP and zero ODP. Moreover, you can recycle used fluid through Inventec’s Ecoprogram. Therefore, it is a flexible, cost-effective immersion fluid.
Thermasolv IM1 Technical Specifications
| Specification | Value |
|---|---|
| Appearance | Colorless, Clear |
| Purity | >99.5% |
| Flash Point | None |
| Boiling Point | 61°C / 142°F |
| Pour Point | -135°C / -211°F |
| Critical Temperature | 195°C / 383°F |
| Critical Pressure | 2.23 MPa |
| Vapor Pressure (@20°C) | 27 kPa |
| Heat of Vaporization (@BP) | 112 kJ/kg |
| Liquid Density (@20°C) | 1520 kg/m³ |
| Kinematic Viscosity (@20°C) | 0.38 cSt |
| Specific Heat (@25°C) | 1183 J/kg-K |
| Surface Tension | 13.6 dynes/cm |
| Thermal Conductivity | 0.069 W/m-K |
| Water Content Spec | 50 ppm |
| Water Solubility in Fluid | 95 ppm (weight) |
| Dielectric Strength | 28 kV |
| Dielectric Constant (@1kHz) | 7.4 |
| Resistivity | 1.00E+09 Ohm-cm |
| Ozone Depletion Potential (ODP) | None |
| Global Warming Potential (GWP) | Medium-Low |
Browse our full range of immersion cooling fluids to compare options for your application.
