Cooling and cleaning chemicals from Inventec, including Thermasolv cooling fluids and Quicksolv cleaning solvents, so your electronics stay cool and clean.
Inventec Performance Chemicals
Thermasolv and Quicksolv Cooling and Cleaning Chemicals
Explore our range of cooling and cleaning chemicals from Inventec. Each product is grouped by purpose, so you can quickly find the right chemical for your application.
Quicksolv Cleaning Chemicals
Fast-evaporating cleaning solvents that remove oils, greases and flux, while staying non-flammable for safer use.
Best Seller
Quicksolv Fides
Non-flammable dielectric cleaner with strength above 60 kV, so you can clean live electrical panels without switching off power.
View Product
Quicksolv DEF 70
Multi-purpose aerosol cleaner with no flash point that also removes oils, greases and flux residues for PCB rework.
View Product
Quicksolv DEF90
Fast-drying, non-flammable degreaser that also leaves no residue, perfect for on-the-spot cleaning of parts.
View ProductThermasolv Single-Phase Immersion Cooling Fluids
Higher boiling point fluids that stay liquid while cooling fully submerged electronics.
Thermasolv CF1
Single-phase fluid with a 170°C boiling point that also offers dielectric strength over 40 kV and low viscosity.
View Product
Thermasolv CF2
With a 110°C boiling point and 39 kV dielectric strength, this single-phase fluid also keeps GWP under 120.
View Product
Thermasolv CF3
A single-phase fluid with a 120°C boiling point and dielectric strength over 35.7 kV, while keeping GWP under 108.
View Product
Thermasolv CF4
Low viscosity (0.71 cSt) single-phase fluid that also offers a 98°C boiling point and 40 kV dielectric strength.
View Product
Thermasolv CF5
Single-phase fluid with a 110°C boiling point that also has an ultra-low GWP of 2.5 and zero ODP.
View Product
Thermasolv CF6
This single-phase fluid has a 158°C boiling point and 40 kV dielectric strength, and also covers a -20°C to 148°C operating range.
View ProductThermasolv Two-Phase and Dual-Mode Immersion Cooling Fluids
Low boiling point fluids that boil and condense to move heat, and also options that suit both single and two-phase systems.
Thermasolv IM1
Suits both one and two-phase immersion, and also offers a 61°C boiling point and 28 kV dielectric strength.
View Product
Thermasolv IM2
Two-phase immersion fluid with a 49°C boiling point and dielectric strength over 40 kV, while keeping GWP under 10.
View Product
Thermasolv IM6
Two-phase immersion fluid with a 47°C boiling point and 79 kV dielectric strength, while also having a GWP of just 1.
View Product
Thermasolv IM7
One and two-phase immersion fluid with a 76°C boiling point that also offers dielectric strength over 25 kV and a GWP of 61.
View ProductThermasolv Direct-to-Chip and Industrial Cooling Fluids
Fluids for cooling at the chip level, and also for wider industrial cooling systems.
Thermasolv DC2
Direct-to-chip two-phase cooling fluid with a 26°C boiling point, while also offering ultra-low GWP and zero ODP.
View Product
Thermasolv WB1
Renewable, plant-based fluid for industrial cooling that also offers a 111°C boiling point and -55°C freezing point.
View ProductNot sure which cooling or cleaning chemical is right for you?
Compare your application, boiling point, dielectric strength and safety requirements with our team, so you can choose with confidence.
Why Choose Our Cooling and Cleaning Chemicals?
High Dielectric Strength
Dielectric strength of up to 79 kV, so electronics can be cooled or cleaned safely while under power.
Wide Boiling Point Range
Boiling points range from 26°C to 170°C, so there is a fluid to suit single-phase, two-phase and direct-to-chip systems.
Low Environmental Impact
There are low to ultra-low GWP options, for example IM6 with a GWP of 1. In addition, much of the range has zero ozone depletion potential.
Safer Handling
Quicksolv solvents and many Thermasolv fluids are non-flammable, which also supports safer use in working environments.
Low Viscosity
Low viscosity fluids help reduce pump strain, so coolant keeps circulating efficiently.
Fast Evaporation
Quicksolv solvents evaporate quickly, so parts are ready for the next stage sooner.
Single-Phase vs Two-Phase Immersion Cooling: What’s the Difference?
In single-phase immersion cooling, the fluid stays liquid. It absorbs heat from the submerged electronics and is then pumped through a heat exchanger to cool down. For example, the Thermasolv CF range has higher boiling points (98°C to 170°C).
In two-phase immersion cooling, on the other hand, the fluid boils. It turns to vapour on hot components, then condenses on a cooled coil and drips back into the bath. As a result, these fluids have low boiling points, such as Thermasolv IM2 (49°C) and IM6 (47°C).
In short, single-phase keeps the fluid liquid, while two-phase uses boiling and condensing to move heat away faster.
Live Cleaning vs Offline Cleaning: What’s the Difference?
Offline cleaning means switching equipment off first. Electrical panels and assemblies are powered down, cleaned and then brought back online, which can stop production.
Live cleaning, on the other hand, happens while the power stays on. For example, Quicksolv Fides is a non-flammable dielectric cleaner with dielectric strength above 60 kV. As a result, it removes light oils and dust from live electrical panels without switching off the power.
In short, live cleaning keeps equipment running, while offline cleaning needs a shutdown first.
Which Cooling or Cleaning Chemical Is Right for You?
| Requirement | Consider (Thermasolv / Quicksolv) |
|---|---|
| High boiling point, single-phase immersion | CF1 / CF6 |
| Ultra-low GWP, single-phase immersion | CF5 |
| Low viscosity, single-phase immersion | CF4 |
| Two-phase immersion | IM2 / IM6 |
| Both single and two-phase systems | IM1 / IM7 |
| Direct-to-chip cooling | DC2 |
| Industrial cooling systems | WB1 |
| Cleaning live electrical panels | Fides |
| Degreasing and PCB rework defluxing | DEF 70 |
| Fast on-the-spot degreasing | DEF90 |
Speak with the ONBoard Solutions team about Thermasolv cooling fluids and Quicksolv cleaning chemicals, so you get the right fit for your application.