MPM stencil wipes are lint-free wiper rolls made for the automatic under-stencil cleaner on MPM printers. They lift solder paste and adhesive from the stencil between prints. As a result, every board gets a clean, accurate print.
Why choose MPM stencil wipes?
Paste left on the underside of a stencil quickly leads to smears and solder bridges. For this reason, most SMT lines wipe the stencil at set intervals. These rolls use a 55 g/m² non-woven fabric with high absorbency, so each pass removes residue quickly.
The fabric is lint-free, which means no loose fibres end up in the apertures. In addition, the rolls are 480 mm wide to suit MPM machines. Therefore, they feed evenly and keep the cleaning cycle running smoothly.
Key features
- Made to fit MPM stencil printers
- 480 mm roll width
- Lint-free 55 g/m² non-woven fabric
- High absorbency for paste and solvent
- Strong fabric that holds together in use
- Bulk boxes of 50 rolls
Where to use MPM stencil wipes
These rolls suit busy SMT lines running MPM printers. For example, they are ideal for:
- Automatic under-stencil cleaning
- Solder paste removal between print runs
- Clearing SMT adhesive residue
- Fine pitch and high-density printing
Because clean stencils mean fewer print defects, you spend less time on rework. This also helps protect your first pass yield.
Tips for best results
First, confirm that your MPM printer takes a 480 mm roll. Next, load the roll so it feeds straight and flat. Then set a wipe frequency that suits your paste and aperture sizes. Finally, use a suitable stencil cleaning solvent for the best finish.
Need help choosing the right roll?
OnBoard Solutions supplies stencil cleaning products to electronics manufacturers across Australia. You can browse our full stencil wiper rolls range or see our DEK stencil wipes. To learn more about electronics assembly standards, visit the IPC website. Alternatively, contact our team to order MPM stencil wipes today.
