Ecorel Easy 862 is a no-clean leaded solder paste made with a Sn62/Pb36/Ag2 alloy. The added silver gives joints extra strength and better resistance to thermal fatigue. As a result, it is a trusted choice for high-reliability electronics where leaded alloys are still required.
Why choose Ecorel Easy 862?
Some products must survive heat cycles, shock and vibration for many years. For this reason, many medical, aerospace and defence makers still rely on leaded solder. This paste adds 2% silver to the alloy, which helps each joint stay strong over time.
The alloy melts at 178°C, so it reflows at lower temperatures than lead-free pastes. This helps protect heat-sensitive parts. In addition, the flux leaves a clear, non-corrosive residue that can stay on the board. You can also inspect joints easily through the clear residue.
Key features
- Sn62/Pb36/Ag2 silver-bearing alloy
- Melting point of 178°C
- Type 4 powder (20 to 38 microns) for ultra-fine pitch printing
- No-clean flux with clear, non-corrosive residue
- Excellent wetting on a wide range of finishes
- Wide process window and stable performance
- Supplied in a 500 g jar
Where to use Ecorel Easy 862
This paste suits work where joint reliability matters most. For example, it is a good fit for:
- Medical devices
- Aerospace and defence electronics
- High-density boards with fine pitch parts
- Repair and rework of existing leaded assemblies
Because it uses Type 4 powder, the paste releases cleanly from small stencil apertures. This gives you even, accurate deposits. It also helps reduce bridging on tight pitch parts.
Tips for best results
First, let the jar reach room temperature before you open it. Next, stir the paste gently to get an even mix. Then print and place your parts. Finally, reflow using a profile that suits your board and oven. Always check the datasheet for full storage and profile details.
Need help with your soldering process?
OnBoard Solutions supplies Inventec soldering materials to manufacturers across Australia. You can browse our full leaded solder paste range or compare the lead-free 305-16 solder paste. Alternatively, contact our team to order Ecorel Easy 862 today. We will help you find the right paste for your line.
