The FS BONDTEC 5310 is a manual gold ball-wedge bonder from the 53xx Series. It processes gold wires from 17.5 to 50 μm in both bumping and stitchbond modes.
- Processes gold wires from 17.5 to 50 μm
- Bumping mode and stitchbond mode
- Motor-driven Z-axis for repeatable results
- Colour display with shuttle-wheel input for easy programming
- Manipulator system for creating different loop shapes
- Minimal operator training required
- Ideal for prototype, rework and small-scale production
Repeatable Ball-Wedge Bonding
A motor-driven Z-axis gives consistently repeatable results. In addition, you can save every bonding parameter to the internal hard disk and recall it later.
Easy to Program and Use
A colour display and shuttle-wheel input make programming simple. Meanwhile, the manipulator system lets operators create a variety of loop shapes.
As a result, operators need only minimal training. So the 5310 suits prototype development, rework and small production runs.
Why Choose This Ball-Wedge Bonder?
The 5310 handles complex bonding tasks that demand top quality at a favourable price. For example, it pairs precise hardware with intuitive manual control.
Therefore, it is a dependable choice wherever you need repeatable, high-quality gold ball bonding without the cost of a fully automatic system.
Bond System
| Attribute | Detail |
|---|---|
| Wire types | Gold wire 17.5–50μm on 2″ spool |
| Bondhead | Ball-Wedge for Gold wire, standard capillaries 16mm (optional 19mm) |
| Ultrasonic System | F&S Generator 67kHz (optional 120, 130, 140kHz) |
Bonder Base
| Attribute | Detail |
|---|---|
| Axes | Programmable linear Z-axis with 60mm stroke, 1μm step resolution, standard working height 55mm, manipulator in X and Y 18x18mm, equivalent to 1:7 |
| Hardware | Stepper motor driven Z-linear axis, single-board PC, coin-guided teach-in, internal hard disk, menu-guided operation via shuttle wheel with confirmation button |
| Software | Programmable single bonds, loop shapes can be saved |
| Control | Manual |
| Dimensions | W x D x H – 63 x 58 x 40cm, weight approx. 30kg |
| Connections | 100–230 VAC, 1 Phase, 50/60Hz, max 230VA, Ø6mm standard-vacuum tubing |
| Heater controller | Integrated in the machine, 0–250°C |
Workholder
| Type | Detail |
|---|---|
| Standard | Ø80mm workholder with mechanical clamping |
| Optional – Large parts | Workholder for parts up to 4×4″ with vacuum and mechanical clamping |
| Optional – TO | TO workholder with mechanical clamping |
| Optional – Rubbered | 4×4″ workholder with rubbered surface and mechanical clamping |
Explore our full range of wire and ribbon bonders to find the right system for your application.
Reviews
There are no reviews yet.